1 rohs peak wave solder temperature rating 260c suitable for cat 3, 5, 6 utp cable or better 350 h minimum ocl with 8ma bias current high performance for maximum emi suppression meets or exceeds ieee 802.3ab standard for 1000base-t usa 858 674 8100 germany 49 7032 7806 0 singapore 65 6287 8998 shanghai 86 21 62787060 china 86 755 33966678 taiwan 886 3 4356768 rohs compliant part number number of ports 1-125 mhz 1-40 mhz 60 mhz 100 mhz 1-10 mhz 30-60 mhz 60-100 mhz 1-10 mhz 10-150 mhz i min jc0-0131nl 2x4 -0.8 -20 -17 -14 -40 -35 -30 -50 -40 2250 jc0-0132nl 2x6 -0.8 -20 -17 -14 -40 -35 -30 -50 -40 2250 jc0-0133nl 2x8 -0.8 -20 -17 -14 -40 -35 -30 -50 -40 2250 notes: 1. contact pulse for led options. description: 10/100/1000 base-t rj45 2xn integrated connector with magnetics, designed to support such applications as: switches, routers, servers and hub. features and benefts: common mode rejection (db typ) crosstalk (db typ) hipot (vdc min) electrical specifcations @ 25c - operating temperature 0c to +70c return loss (db typ) 100 ( 15 ) insertion loss tx/rx (db min) rj45 durability testing rating part number mating force (max) unmating force (max) durability jc0 series 5 ibs./2.268 kgs. 5 ibs./2.268 kgs. 750 insertions us patent #7241181 rj45 material specifcation part number shield contact material finish material plating area solder area material specifcation msl jc0 series brass 10-20 inches thick nickel over brass phosphor bronze 30 inches gold over 30-80 inches nickel tin matte fnish thermoplastic ul 94 v-0 1 housing notes: 1. connector dimensions comply with fcc dimension requirements 2. msl = moisture sensitivity level rating from 1 to 5 (highest rating = 1, lowest rating = 5). 2 J405.g (09/14) pulseelectronics.com pulsejack? 2xn gigabit
2 2x4 mechanicals (no leds) jc0-0131nl us patent #7241181 J405.g (09/14) pulseelectronics.com pulsejack? 2xn gigabit
3 jc0-0132nl 2x6 mechanicals (no leds) us patent #7241181 J405.g (09/14) pulseelectronics.com pulsejack? 2xn gigabit
4 mechanicals jc0-0133nl us patent #7241181 J405.g (09/14) pulseelectronics.com pulsejack? 2xn gigabit
5 pin-out assignment schematic jc0-0131nl/32nl/33nl us patent #7241181 note: all parts use the same port indentification system. jc0-0133 (2x8) shown here. J405.g (09/14) pulseelectronics.com pulsejack? 2xn gigabit
6 for more information 2xn gigabit application note pulse worldwide headquarters 12220 world trade drive san diego, ca 92128 u.s.a. tel: 858 674 8100 pulse europe einsteinstrasse 1 d-71083 herren - berg germany tel: 49 7032 7806 pulse china headquarters b402, shenzhen academy of aerospace technol - ogy bldg. 10th kejinan road high-tech zone nanshan district shenzen, pr china 518057 pulse north china room 2704/2705 super ocean finance ctr. 2067 yan an road west shanghai 200336 china pulse south asia 135 joo seng road #03-02 pm industrial bldg. singapore 368363 tel: 65 6287 8998 fax: 65 6287 8998 pulse north asia 3f, no. 198 zhongyuan road zhongli city taoyuan county 320 taiwan r. o. c. tel: 886 3 4356768 fax: 886 3 4356823 (pulse) performance warranty of products ofered on this data sheet is limited to the parameters specifed. data is subject to change without notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. ? copyright, 2014. pulse electronics, inc. all rights reserved. us patent #7241181 these integrated connector modules are specifcally designed for the implementation of a 10base-t, 100base- tx and 1000base-tx transmission over data-grade unshielded twisted pair cable (utp-3, 5-5e and 6). the connectors category provide excellent emi fltering and are suitable for embedded systems and multiport applications. pulse has worked closely with the leading ic manufacturers in providing these 10/100/1000 solutions, thereby assuring comptability with each transceiver. jc0 series meet the stringent open circuit inductance requirements imposed by ieee. when an 8ma dc current is applied across the transformer windings, the transformer will provide at least 350 h of open circuit inductance. the transformers used in each module also provide 2250vdc minimum isolation, wide band width with minimal attenuation and fast rise times to minimize system level jitter. notes: 1. for maximum emi suppression (electromagnetic interference) place the 3. connections between 10/100/1000 ic and the connector should be direct decoupling capacitors adjacent to vcc and 50 connections. (ideally no change in direction) and of minimum length. 2. connections to ground should be as short as possible. pulseelectronics.com pulsejack? 2xn gigabit J405.g (09/14)
|
